0911 47 22 55 (HotLine)
Giỏ hàng

Thương Hiệu

Sản Phẩm Giá Trị

  • Gia Tốc Kế 3501A2060KG PCB Piezotronics Việt Nam

Gia Tốc Kế 3501A2060KG PCB Piezotronics Việt Nam

Mô tả:

Shock accelerometer, 60 kg, MEMS sensor installed in chip carrier (SMT)

  • Độ nhạy: (±50%).003 mV/g (.0003 mV/(m/s²))
  • Phạm vi đo: ±60000 g (±588400 m / s² pk)Dải tần số: (1dB) 0 đến 20000 Hz
  • Hình học cảm biến: Hoạt động đầy đủ
  • Gắn: Gắn kết bề mặt
  • Trọng lượng: 0,005 oz (0,15 gm)

Thông số kỹ thuật: 

PERFORMANCE
Sensitivity (±50 %) (at 10 VDC excitation) .003 mV/g .0003 mV/(m/s²) [2]
Sensitivity 0.0003 mV/V/g 0.00003 mV/V/(m/s²) [3]
Measurement Range ±60000 g ±588400 m/s² pk  
Frequency Range (1 dB) 0 to 20000 Hz 0 to 20000 Hz  
Resonant Frequency >120 kHz >120 kHz  
Damping Ratio 2 % Critical 2 % Critical [1]
Non-Linearity (per 10,000 g (98,100 m/s²)) ±1 % ±1 %  
Transverse Sensitivity ≤3 % ≤3 %  
ENVIRONMENTAL
Overload Limit (Shock) ±100000 g pk ±980665 m/s² pk [5]
Overload Limit (Mechanical Stops) ≥80000 g ≥782534 m/s² pk  
Temperature Range (Operating) -65 to 250 °F -54 to 121 °C  
Temperature Coefficient of Sensitivity -0.11 %/°F -0.20 %/°C [1]
Zero g Offset Temperature Shift ±10 mV ±10 mV [4]
Base Strain Sensitivity 0.3 g/µε 2.94 (m/s²)/µε [1]
ELECTRICAL
Excitation Voltage (Maximum) 15.0 VDC 15.0 VDC  
Current Consumption <3 mA <3 mA  
Input Resistance (±2000 Ohm) 6000 Ohm 6000 Ohm [2]
Output Resistance (±2000 Ohm) 6000 Ohm 6000 Ohm [2]
Offset Voltage -40 to +40 mVDC -40 to +40 mVDC [2]
Settling Time 0.01 sec 0.01 sec [6]
PHYSICAL
Sensing Element Piezoresistive MEMS Piezoresistive MEMS  
Sensing Geometry Full Active Full Active  
Housing Material Ceramic Ceramic  
Sealing Epoxy Epoxy  
Size - Height 0.085 in 2.16 mm  
Size - Length 0.236 in 6.00 mm  
Size - Width 0.138 in 3.50 mm  
Weight 0.005 oz 0.15 gm [1]
Electrical Connector Solder Tabs Solder Tabs  
Mounting Surface Mount Surface Mount

[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[1] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[2] Verified with test data provided on supplied calibration certificate.
[1] Typical.
[7] See PCB Declaration of Conformance PS151 for details.

Đánh giá

0

0 đánh giá





Đánh giá của bạn

Sản phẩm liên quan Xem thêm

Sản phẩm bán chạy